Honeywell CC-TAID01 Analog Input Module

  • 0 reviews
  • Write a review
    • Product Code: CC-TAID01
    • Availability: In Stock

    Purchase Attributes：Original, Brand New

    Service Attributes

    ▷ Stock & Logistics：Fast Delivery

    ▷ After-sales Guarantee：12 Months Warranty

    ▷ Online Customer Service：24 Hours Online Support

    ▷ Product Advantages：Competitive Price,  Long Service Life

    Application Attributes：Honeywell CC-TAID01  Analog Input Module

    Honeywell CC-TAID01 16-Channel Isolated 4-20mA HART Analog Input Module (For Experion PKS C300 / C200 Controller)
    Manufacturer: Honeywell Process Solutions
    Model: CC-TAID01 (C Series I/O Card for Experion PKS DCS)
    Matching Controller: C300 / C200 Process Controller via FTE I/O Carrier Rack; Not compatible with TDC300, FSC SIS systems
    Type: Hot-swappable 16-channel galvanic isolated analog input module, native HART 5/7 digital communication support
    Core Function: High-precision acquisition of 4–20mA 2-wire loop-powered transmitter signals (flow, pressure, level, temperature); per-channel open/short circuit detection, overvoltage surge protection, redundant FTE communication, predictive maintenance via HART device diagnostics; used for continuous process closed-loop control in refinery, power plant, chemical plant
    1. Product Overview
    CC-TAID01 is the mainstream analog input card of Honeywell C Series I/O platform, exclusively designed for Experion PKS distributed control system. It adopts single-channel independent isolation design to eliminate ground loop interference caused by field equipment potential difference, solving unstable measurement problems in high-frequency inverter, motor cabinet environments. It supports full HART protocol, can read instrument internal parameters, calibration data, alarm status and device self-diagnosis information without additional HART adapter, realizing predictive maintenance of field transmitters. Each channel provides built-in loop power supply for 2-wire transmitters, no external 24VDC field power required. Hot-plugging design allows online replacement without shutting down the controller rack; built-in multi-level hardware watchdog, channel-by-channel fault self-test, fault signal uploaded to Experion station for alarm display. The module communicates with C300 controller through redundant FTE fault-tolerant Ethernet I/O carrier, supporting dual redundant I/O rack configuration to improve system availability. Matched with dedicated analog FTA terminal base for field wiring separation, widely deployed in ethylene cracking, refining unit, thermal power boiler & turbine main process measurement cabinets.
    2. Complete Technical Specifications
    • Channel Count: 16 fully independent analog input channels
    • Input Signal Standard: 4–20mA DC loop-powered two-wire transmitter; 0–20mA extended range supported
    • Galvanic Isolation: 1500VAC rms per channel isolation between field circuit and control logic
    • HART Compatibility: HART 5 / HART 7 multi-drop digital communication per channel
    • Measurement Accuracy: ±0.075% full scale typical, ±0.15% full scale maximum
    • Resolution: 16-bit high precision A/D conversion
    • Loop Supply: 22–26VDC built-in loop power for each channel, max 22mA drive capability
    • Channel Diagnostics: Open circuit, short circuit, over-range, under-range, loop fault detection per channel
    • Surge & ESD Protection: ±15kV contact ESD, 2kV line surge suppression on all field terminals
    • Hot Swap Support: Hot plug/unplug without controller rack power off
    • Communication Bus: Redundant FTE fault-tolerant Ethernet to C300 controller
    • Operating Temperature: 0℃ ~ +60℃ forced air cabinet environment
    • Storage Temperature: -40℃ ~ +85℃
    • Humidity: 5% ~ 95% RH non-condensing
    • Power Consumption: Max 18W total module power from rack backplane 24VDC
    • Mechanical Size: Standard C Series I/O module card, rack slot mounted, single slot occupancy
    • Certification: CE, UL508, CSA industrial safety certification
    3. Core Hardware Features
    1. Per-channel independent isolation transformer, eliminate cross-channel interference and ground loop drift
    2. Native HART modulation/demodulation circuit, no external HART interface card required
    3. 16-bit high linearity A/D converter, stable measurement under low signal fluctuation
    4. Multi-color front panel LED: RUN, FAULT, COMM, channel status indicator
    5. Dual redundant FTE communication interface, automatic switchover when single network fails
    6. Complete channel self-diagnosis, fault timestamp recording and event upload to Experion server
    4. Industrial Application Scenarios
    • Petrochemical refinery & ethylene plant: flow, pressure, level, temperature transmitter signal acquisition for main distillation, cracking reactor control loops
    • Thermal power plant boiler & turbine DCS rack: steam pressure, feedwater flow, furnace temperature continuous analog measurement
    • Offshore oil & gas platform process control cabinet: HART intelligent transmitter multi-channel signal collection
    • Chemical plant reactor continuous process monitoring, closed-loop PID control analog input front-end
    Honeywell © CC-TAID01 C Series HART Analog Input Module for Experion PKS C300


    Write a review